Reasons Your Water Heater Isn't Functioning
Reasons Your Water Heater Isn't Functioning
Blog Article
How do you feel in regards to What Would Cause My Electric Water Heater to Stop Working??
Many modern-day houses make use of an electrical water heater for their heating system, as a result of its benefit and convenience of use. Nonetheless, much like any other electrical devices, issues might develop with its usage, all of a sudden. It can be truly irritating to get up to a cold shower rather than a hot one or having your bathroom with water that isn't hot adequate and even also hot. Whatever the instance may be, hot water heater issues can be fairly stressful. Fortunately, we have actually made a list of feasible solutions to your hot water heater issues. There are a variety of factors that might create a number of these troubles, it could be a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for security. Whatever the problem is, getting it taken care of need to not position way too much of an issue if you adhere to these steps:
Call An Expert:
If after changing all faulty components and resetting your temperature level, the hot water heater still isn't working, you might require to contact a professional plumber for a specialist opinion. The issue with your heating system could be that the hot and cold faucets have actually been switched or it may be undersized for the quantity of warm water needed in your home. Whatever the instance might be, a professional plumber would aid solve the problem.
Inspect Your Power Supply:
As standard as this may seem, it is extremely needed. Without adequate power, your water heater will not work. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the issue, just transform it on and off once more. Replace any broken or worn-out fuse. Evaluate the home appliance with power after these adjustments to see if it's currently working.
Check Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot enough, you may need to inspect the temperature settings on your top thermostat. Make sure the breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red button for temperature reset above the thermostat. This should help heat the water. Turn the circuit breaker back on and check if the issue has been fixed.
Inspect the Heating Element in the Water Heater:
If it's not a power problem, then try having a look at your heating element if it is still working. Test each of your heating elements to be sure the problem isn't with any of them. If any one of them is damaged, change that component and afterwards inspect whether the warm water is back on.
Conclusion
Water heater problems are not constantly significant. Most of them result from small problems like a blown fuse or worn-out heating element. Replacing the damaged components must work. Nevertheless, if you are still unable to solve the trouble, give a call to your local plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you really like reading up on How to Troubleshoot and Repair an Electric Water Heater? Give feedback further down. We would be interested to see your opinion about this posting. Hoping to see you back again soon. Enjoyed our content? Please share it. Help others check it out. Many thanks for your time. Visit again soon.
Schedule Your Job Now
Report this page